Printer Friendly Page
Close Page

GasFinder Open Path Monitor - Applications

Perimeter and Area Monitoring - GasFinder can be permanently installed to monitor chemical and petroleum plants for both combustible and toxic gases. GasFinder can be used to replace arrays of point sensors for perimeter monitoring. A single light path will replace many point sensors. With GasFinder perimeter monitoring, all gas dispersed from a facility is detected and logged.
Emission Measurement - An estimate of the total fugitive emissions from a site can be determined using environmental data, EPA gas dispersion models, and GasFinder sensor data.
Portable Leak Detection - GasFinder can be used as a portable open path gas sensor to survey a large site relatively quickly. Areas of elevated gas concentration can be bracketed using shorter path lengths in order to locate leaking valves, flanges or fittings.